Contact this seller now:
Site Feedback X

Thank you for your feedback. This is for site feedback and only goes to EquipmentTrader. This will not go to the seller of this vehicle.

2004 RAYCO C87FM MULCHER in FAIRBANKS, AK

DETAILS FINANCE SHIPPING QUOTEINSPECTION REQUEST CONTACT SELLER SHARE THIS
2004 RAYCO C87FM ,Fairbanks, AK - 119853081 - EquipmentTrader Contact this seller now: 0026-223 (709) View Larger More

Description

84" dozer, w/ winch, ripper, extra teeth: One of a kind combination mulcher with 6 way dozer blade. This is a 2004 Rayco C87FM mulcher. It has the same crawler chassis as the C87D (dozer), so it was easily converted into a dozer as well. By welding attachment points to a John Deere skid steer mounting plate, the mulching head can be switched out with the included 6 way skid steer dozer blade (or any skid steer attachment).It takes about 30 minutes to switch the machine from a mulcher to a dozer: 3 pins and 2 hoses. The mulching hoses are connected together and held out of the way as shown in the video. The dozer blade is actually an 8 way blade as the operator can also adjust the forward/backward tilt via the top cylinder. Because the blade is further forward than a factory built blade, I believe it's better balanced and more functional than the C87D. This rig can push a full load of gravel w/o a problem.I bought the mulcher 4 years ago used. It had a hairline fracture on the track frame which was ground out, welded, covered with 3/4 steel, preheated, and patched with 4 lbs of 8018 and pinged. The engine has been replaced, so it is newer than the original. Hours unknown but there is a sticker on the dash that says 2350 hours (hard to read). I put maybe 300 hours of easy time on it to clear 1 mile of road and some homesites. Time is better judged from the sprockets which are in good condition.This rig has zero issues. New computer dash (1200.00). It starts without ether even when cold and after sitting for the winter. No leaks. Runs great.The machine comes with $7,000 in accessories: Takeuchi 6 way dozer blade, ripper, winch, extra set of teeth, track adjustment too,

Price: $35,000





Specification

  • Year:
    2004
  • Make:
    RAYCO
  • Model:
    C87FM
  • Class:
    FORESTRY
  • Category:
    Mulcher
  • Engine Make:
    Deutz
  • Hours Used:
    3000
  • New/Used:
    U
  • Price:
    $35,000
More


Seller Information

Private Seller

0026-223 (709)


Fairbanks, AK
99709



Contact Seller

*required


Attn: Private Seller
Hello, I'm interested in your 2004 RAYCO C87FM Stock #:. Please contact me *, you can reach me at * or at *


Comments




Thank you,
*



Would you like to get our newsletter and special offers via email?






Your message was sent to Private Seller




CLOSE

Find Similar Equipment

new search
2015 Fecon
CEM 36

Mulcher
Call for price

Cincinnati, OH
2003 BANDIT
3680

Mulcher
Call for price

Marlton, NJ

Bellview, TX

Grand Rapids, MI
2011 FECON
FTX100L

Mulcher
Call for price

Cincinnati, OH
2008 Asv
PT100

Mulcher
Call for price

Sayler Park, OH
2004 RAYCO
C87FM

Mulcher
$35,000

Fairbanks, AK
2017 FECON
BH74SS

Mulcher
Call for price

Brainerd, MN
FECON
BH-74SS

Mulcher
Call for price

Cincinnati, OH
2005 Fecon
FTX90-L

Mulcher
$52,500

Jacksonville, NC
2014 LAMTRAC
LTR6125

Mulcher
$164,500

Lufkin, TX
2016 FECON
BH74SS

Mulcher
Call for price

Cincinnati, OH

Mc Donald, PA
2012 PRENTICE
2864

Mulcher
$139,500

Livingston, TX
2012 RAYCO
C100LGP

Mulcher
$59,900

Edgerton, WI

Chattanooga, TN
2000 HYDRO-AX
421 E

Mulcher
$95,000

Abilene, TX
2008 CATERPILLAR
299C

Mulcher
$65,000

Dallas, TX
2007 FECON
BH74SS

Mulcher
$19,500

Kansas City, KS

Dallas, TX
2006 ASV
RC100

Mulcher
$29,500

Dallas, TX

Dallas, TX

Dallas, TX
2007 ASV
RC100

Mulcher
$39,500

Dallas, TX

Dallas, TX


Email This Listing X

We use the email addresses you enter below to send this listing. We do not save or

re-use them in any way. We ask for your name and address only to tell your friend

who sent the message.


* = Required







Send