Thank you for your feedback. This is for site feedback and only goes to EquipmentTrader. This will not go to the seller of this vehicle.
Product FeaturesElectric pump for driving a hydraulic torque wrench (sold separately) in settings where compressed air is not available1.7 horsepower motor with high power-to-weight ratio operates at low voltagesTwin torque wrench valves can be controlled remotelyAnalog pressure gauge for monitoring of pressure in psi and barMaximum operating pressure rating of 10,000 pounds per square inch (psi) Product Description The Enerpac ZU4204BB-Q hydraulic electric pump has a 1.7 horsepower motor and solenoid valves for powering a hydraulic torque wrench in construction, manufacturing, and maintenance and repair applications. The 1.7 horsepower motor has a high power-to-weight ratio and can operate at low voltages. The twin torque wrench valves can be controlled remotely and are suitable for use with a double-acting torque wrench. An analog pressure gauge displays output pressure in pounds per square inch (psi) and bar. The pump's auto-cycle feature provides continuous operation of the torque wrench when the advance button is held down. An adjustable pressure relief valve helps protect the pump from overload. The pump's steel reservoir resists corrosion and wear, and the motor and electronics are covered by a molded composite shroud to help protect them from contamination and wear. It has a non-conductive carrying handle for transport. A low-voltage pendant switch controls the motor and valves, and the switch has a 10-foot cord to allow the operator to control the pump from a distance.SpecificationsMaximum operating pressure 10,000 pounds per square inch (psi) Maximum output flow rate per minute, at 100 psi 700 cubic in. Maximum output flow rate per minute, at 700 psi 535 cubic in. Maximum output flow rate per minute, at 5,000 psi 76 cubic in. Maximum output flow rate per minute, at 10,000 psi 60 cubic in. Usable oil capacity 1 gallon (231 cubic in.) Motor Rating 1.7 horsepower, universal Motor voltage 115V Operating noise level 85 to 90 decibels (dBA) Output valve type Twin torque wrench Power source 15 amp/120V, 50/60 Hertz, grounded, single-phase Weight 73 lb. Dimensions 17 x 19 x 9.46 inches (H x W x D) $3500, 4072277330
Attn: Private Seller
Hello, I'm interested in your ENGO ZU4204BB-Q 115 Volt Electric Torque Wrench Pump Stock #:. Please contact me *, you can reach me at * or at *
We use the email addresses you enter below to send this listing. We do not save or
re-use them in any way. We ask for your name and address only to tell your friend
who sent the message.