Sell

Rent

Search
Used 2018 YANMAR Loaders V12
# WL040260
$269/day
$1,076/week
$2,430/month
Purchase Price: $89,700
Make An Offer
Buck & Knobby Equipment Co.
Ottawa Lake, MI

Popularity Stats

Loading Data...
Loading Data...
Loading Data...

Description

# WL040260
2018 YANMAR, V12 Wheel Loaders, Maximum visibility from the cab, Easy-to-use quick coupler, Excellent parallel kinematics, 2 doors, Comfortable cab with responsive steering, Easy-handling joystick with third and fourth control circuit in one hand, YANMAR Smart Control (TSC), Excellent service access, Central pivot with floating axle, the same as on larger wheel loaders, Automatic self-locking differentials in both axlesSerial Number: TL12040260

Message from Buck & Knobby Equipment Co.

WELCOME TO BUCK & KNOBBY EQUIPMENT CO, INC. We carry an expansive display of new and used equipment and a wide range of brands that will help you get any job done quickly and efficiently. We represent major lines including Hyundai, Manitou, Mustang, and Yanmar. We also offer Bob-Cat Mowers, Honda Power Equipment, Grasshopper, Scag Mowers, Stihl and more. We also stock a variety of Eager Beaver, Felling and Interstate Trailers ready for immediate delivery.

Details

  • Condition: Used
  • Year: 2018
  • Make: YANMAR
  • Model: V12
  • Class: EARTHMOVING
  • Category: Loaders
  • Location: Ottawa Lake, MI
  • Horse Power: 100
  • Stock Number: WL040260
  • Serial Number: TL12040260
  • Hours: 118
  • Capacity (lbs): 42
  • Movement Type: WHEELED

Factory Specs

Operational

  • AXLES: Rigid Front Axle With 45% Limited Slip Differential. Oscillating Rear Axle With 45% Limited Slip Differential. Center-mounted Disc Brake.
  • BRAKES Auxiliary brake:: Hydrostatic Through Closed-circuit Travel Drive.
  • BRAKES Parking brake:: Mechanically Actuated Center-mounted Drum Brake On Front Axle.
  • BRAKES Service brake:: Hydraulically Actuated Center-mounted Drumbrake, Acting On All 4 Wheels Via 4-wheel Drive.
  • CAB Cab exterior noise level: 101 D B ( A)
  • CAB Cab interior noise level: 74 D B ( A)
  • CAB Five: Noise Level Values Measured In Compliance With Directive 2000/14/ EC And EN474.
  • CAB Four: Cab Heating With 3-speed Heater Fan (choice Fresh Air/recirculating Air) And Windshield Defroster, Frontand Rear
  • CAB One: Rubber-mounted Full-vision Steel Cab, ROPS ( EN ISO 3471) And FOPS** ( EN ISO 3449) Certified.
  • CAB Standard: : Air Conditioning. Back-up Alarm For Reverse Travel. Battery Disconnector. Guard For V-belt. Immobilizer, Electronic, Keypad Operation. 2 Working Floodlights, Front. 2 Working Floodlight, Rear. Rearaxle Weights, Approx. 660 Lbs (300 Kg). Steering Wheel With Height And Tilt Adjustment.
  • CAB Three: Driver's Seat MSG85 (standard Version) With Hydraulic Cushioning And Lap Belt, Weight-adjustable, Incompliance With ISO 7096 And ISO 6683.
  • CAB Two: Cab Featuring Two Doors, Intermittent Wipers And Washer (front And Rear), Tinted Panoramic Safetyglass, Sliding Window On Left-hand Side.
  • ELECTRICAL SYSTEM: Lighting System In Compliance With US/ ISO Standards, H7 Headlamps.
  • ELECTRICAL SYSTEM Battery: 12 V / 135 Ah
  • ELECTRICAL SYSTEM Cold-starting aid: Glow Plugs
  • ELECTRICAL SYSTEM Generator : 14 V / 95 A
  • ELECTRICAL SYSTEM Nominal voltage: 12 V
  • ELECTRICAL SYSTEM Starter: 12 V / 3.5 Hp (2.6 K W)
  • FLUID CAPACITIES Ad Blue Tank: 2.6 Gal (10 L)
  • FLUID CAPACITIES Engine Coolant: 3.9 Gal (15 L)
  • FLUID CAPACITIES Engine Oil: 2 Gal (8 L)
  • FLUID CAPACITIES Fuel tank: 29 Gal (110 L)
  • FLUID CAPACITIES Hydraulic system (incl. tank): 25 Gal (93 L)
  • FORK LIFT ATTACHMENT: Operating Load Determined On Level Ground = 80 % Of Tipping Load, Articulated
  • FORK LIFT ATTACHMENT Length fork tines 4" x 1.8" (100 mm x 45 mm): 44" (1,120 Mm)
  • FORK LIFT ATTACHMENT Operating load in transport position, above ground level, total steering range: 4,948 Lbs (2,244 Kg)*
  • FORK LIFT ATTACHMENT Operating load (SAE J 1197) over the total lift and steering range: 4,120 Lbs (1,905 Kg)*
  • FORK LIFT ATTACHMENT Stability factor: 2
  • FORK LIFT ATTACHMENT Width of fork carrier: 49" (1,240 Mm)
  • LOADER FRAME : Loader Installation Featuring True Parallel Linkage And Hydraulic Quick Coupler
  • LOADER FRAME Breakout force at bucket edge (SAE J 732): 13,264 Lbf (59,000 N)
  • LOADER FRAME General-purpose bucket (SAE J 742): 1.57 Yd3 (1.20 M3)
  • LOADER FRAME Lift capacity at ground level (SAE J 732): 15,962 Lbf (71,000 N)
  • POWER TRANSMISSION: Hydrostatic Drive, Closed Circuit, Independent From Loader Hydraulics. Perfected Driving Automatics,automatic Optimisation And Adjustment Of Drawbar Pull And Speed. Hydraulic Motor Powershift Providing Two Speed Ranges. Infinitely Variable Speed Control Forward And Reverse. 4-wheeldrive From Reduction Gear On Rear Axle Via Cardan Shaft To Front Axle. Inching Pedal For Sensitivedriving And Stopping At High Rpm.
  • POWER TRANSMISSION "High" : 0-6.8 / 0-22 Mph (0-12 / (0-36 Kph)
  • POWER TRANSMISSION One: 4 Speeds:
  • POWER TRANSMISSION "Low": 0-3.7 / 0-11.8 Mph (0-6 / 0-19 Kph)
  • STEERING: Articulated, 2 Steering Cylinders With Final Positioning Damping On Both Sides, Fully Hydraulic Through Load- Sensing Priority Valve, Quick And Easy Steering Even At Engine Idle-running Speed.
  • STEERING Total steering angle: 80 Deg.
  • TIRES Standard: 405/70 R 20 SPT 9 Dunlop

Dimensions

  • OPERATING DATA, STANDARD EQUIPMENT Operating weight (SAE J 1197): 15,432 Lbs (7,000 Kg)
  • OPERATING DATA, STANDARD EQUIPMENT Tipping load, articulated at full reach (ISO 14397-1): 9,700 Lbs (4,400 Kg)
  • OPERATING DATA, STANDARD EQUIPMENT Tipping load, straight at full reach (ISO 14397-1): 11,023 Lbs (5,000 Kg)
  • OPERATING DATA, STANDARD EQUIPMENT Total height (top of cab): 9' 1" (2,780 Mm)
  • OPERATING DATA, STANDARD EQUIPMENT Total length, bucket on ground: 17' 11" (5,480 Mm)
  • OPERATING DATA, STANDARD EQUIPMENT Total width: 6' 11" (2,100 Mm)
  • OPERATING DATA, STANDARD EQUIPMENT Turning radius at outside bucket edge: 15' 4" (4,680 Mm)
  • OPERATING DATA, STANDARD EQUIPMENT Wheelbase: 7' 6" (2,290 Mm)

Hydraulics

  • HYDRAULIC SYSTEM Control unit: : Proportional Hydraulic Valve With 3 Control Circuits And High-speed Control For Tilting. Simultaneous, Independent Control Of All Movements. Single, Four-way Control Lever (multi-functionlever) For Tilt And Lift Cylinder With Integrated Travel Direction Selector Switch And Switch For Additionalcontrol Circuit. Float Position In Control Circuit " Lowering", Electro-hydraulically Operated. Additionalcontrol Circuit Including Quick Couplers And Continuous Operation Function Provided As Standard.
  • HYDRAULIC SYSTEM Four: Single, Four-way Control Lever (joystick) With Integrated Direction-of-travel Switch And Switch Foradditional Control Circuit.
  • HYDRAULIC SYSTEM Hydraulic cylinders:: 1 Lifting Cylinder, 1 Tilt Cylinder, All Dual-action
  • HYDRAULIC SYSTEM Max. pump capacity: 20 Gpm (78 L/min)
  • HYDRAULIC SYSTEM Max. working pressure: 3,625 Psi (250 Bar)
  • HYDRAULIC SYSTEM One: The Thermostatically Controlled Oil Circuit Ensures That The Oil Temperature Is Promptly Reached Andavoids Overheating. Return Filter Installed In Hydraulic Tank Allows For Eco-friendly Replacement Of Filterelements
  • HYDRAULIC SYSTEM Three: Hydraulically Switchable Float Position By Overdriving The Pressure Point “ Lower” On The Joystick, Electricallyswitchable Continuous Operation Function.
  • HYDRAULIC SYSTEM Two: Fingertip Control For 3rd Control Circuit, Electro-proportional, Oil Flow Limitation Via Machine Functiondisplay, Continuous Operation. Installation On Loader Frame Incl. Couplings.

Engine

  • Combustion: 4-stroke Cycle, Common Rail Injection
  • Cooling system: Water
  • Displacement: 220 In3 (3,600 Cm3)
  • Engine power: 100 HP (74.4 K W)
  • Manufacturer, model: Deutz, TCD3.6 L4
  • Net power rating at 2,200 rpm (SAE J 1349): (100 Hp) 74.4 K W
  • Type: 4-cylinder Turbo Diesel Engine With Intercooler, EPA Tier 4 Final / EC Stage IV

Manufacturer Description

Loaders

YANMAR V12 5012755455
This 2018 YANMAR V12 has 118 hours of use and is located in Ottawa Lake, Michigan. Complete the form below to send us an email for more information about this Loaders.

Estimate Payments

Estimate Payments1 -

Estimate
Payment Shown Here
1Excludes tax, title, tags and other fees. For general informational purposes only.
Used 2018 YANMAR Loaders V12
# WL040260
$269/day
$1,076/week
$2,430/month
Purchase Price: $89,700
Make An Offer
Contact Buck & Knobby Equipment Co.
1-888-395-7785
Buck & Knobby Equipment Co.

WELCOME TO BUCK & KNOBBY EQUIPMENT CO, INC. We carry an expansive display of new and used equipment and a wide range of brands that will help you get any job done quickly and efficiently. We represent major lines including Hyundai, Manitou, Mustang, and Yanmar. We also offer Bob-Cat Mowers, Honda Power Equipment, Grasshopper, Scag Mowers, Stihl and more. We also stock a variety of Eager Beaver, Felling and Interstate Trailers ready for immediate delivery.

Call 1-888-395-7785 Call 1-888-395-7785
Contact Seller

Call 1-888-395-7785

Rental Dates (optional)

I would also like to see:  

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Buck & Knobby Equipment Co.

WELCOME TO BUCK & KNOBBY EQUIPMENT CO, INC. We carry an expansive display of new and used equipment and a wide range of brands that will help you get any job done quickly and efficiently. We represent major lines including Hyundai, Manitou, Mustang, and Yanmar. We also offer Bob-Cat Mowers, Honda Power Equipment, Grasshopper, Scag Mowers, Stihl and more. We also stock a variety of Eager Beaver, Felling and Interstate Trailers ready for immediate delivery.

Call 1-888-395-7785 Call 1-888-395-7785
Contact Seller

Call 1-888-395-7785

Rental Dates (optional)

I would also like to see:  

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Disclaimers

Equipment Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. EquipmentTrader.com is not responsible for the accuracy of the information. Please refer to the Equipment Trader Terms of Use for further information.


Download Our App
image loading image loading