Sell

Rent

Search
New 2018 YANMAR Loaders V8
# WL041076
$231/day
$924/week
$2,079/month
Purchase Price: $71,500
Buck & Knobby Equipment Co.
Ottawa Lake, MI

Popularity Stats

Loading Data...
Loading Data...
Loading Data...

Description

# WL041076
2018 YANMAR, V8 Wheel Loaders, Bucket coming ( Not Shown) Schaeff Hydraulic Quick Coupler. Transverse-mounted diesel engine, high performance, minimized fuel consumption, low emissions. Hydrostatic travel drive, high traction power, infinitely variable speed control by driving automatics, optimum driving performance in all ground conditions, wear-free braking. Powerful hydraulics, high lifting and breakout forces. Excellent parallel kinematics for synchronized parallel operation of bucket and forklift attachment over the entire lifting height. Ease of operation, hydraulic pilot control, multi-function joystick for intuitive control. Ease of serviceability, long maintenance intervalsSerial Number: TL08041076

Message from Buck & Knobby Equipment Co.

WELCOME TO BUCK & KNOBBY EQUIPMENT CO, INC. We carry an expansive display of new and used equipment and a wide range of brands that will help you get any job done quickly and efficiently. We represent major lines including Hyundai, Manitou, Mustang, and Yanmar. We also offer Bob-Cat Mowers, Honda Power Equipment, Grasshopper, Scag Mowers, Stihl and more. We also stock a variety of Eager Beaver, Felling and Interstate Trailers ready for immediate delivery.

Details

  • Condition: New
  • Year: 2018
  • Make: YANMAR
  • Model: V8
  • Class: EARTHMOVING
  • Category: Loaders
  • Location: Ottawa Lake, MI
  • Horse Power: 60
  • Stock Number: WL041076
  • Serial Number: TL08041076
  • Hours: 309
  • Capacity (lbs): 28
  • Movement Type: WHEELED

Factory Specs

Operational

  • AXLES: Rigid Front Axle With 35% Limited Slip Differential. Oscillating Rear Axle With 35% Limited Slip Differential. Center-mounted Disc Brake.
  • BRAKES Auxiliary brake:: Hydrostatic Drive Provides Dynamic Braking
  • BRAKES Parking brake:: Mechanically Actuated Center-mounted Disc Brake On Front Axle
  • BRAKES Service brake:: Hydraulically Actuated Center-mounted Disc Brake, Acting On All 4 Wheels Via 4-wheel Drive
  • CAB Cab exterior noise level: 101 D B ( A)
  • CAB Cab interior noise level: 75 D B ( A)
  • CAB Five: Noise Level Values Measured In Compliance With Directive 2000/14/ EC And EN474. * With Rear Axle Weights ** FOPS-approved Only With Skylight Guard (optional)
  • CAB Four: Cab Heating With 3-speed Heater Fan (choice Fresh Air/recirculating Air) And Windshield Defroster, Front And Rear.
  • CAB One: Rubber-mounted Full-vision Steel Cab, ROPS ( EN ISO 3471) And FOPS** ( EN ISO 3449) Certified.
  • CAB Standard: : Air Conditioning. Back-up Alarm For Reverse Travel. Battery Disconnector. Guard For Fan Wheel And V-belt. Immobilizer, Electronic, Keypad Operation. 2 Working Floodlights, Front. 2 Working Floodlight, Rear. Rear Axle Weights, Approx. 575 Lbs (260 Kg). Steering Wheel With Height And Tilt Adjustment.
  • CAB Three: Driver’s Seat MSG 85 (comfort Version), With Hydraulic Cushioning, Extra-high Backrest, Lumbar Support, Longitudinal And Tilt Adjustments, Lap Belt, In Compliance With ISO 7096 And ISO 6683.
  • CAB Two: Cab Featuring Two Doors, Intermittent Wipers And Washer (front And Rear), Tinted Panoramic Safety Glass, Sliding Window On Left-hand Side, Sun-blind.
  • ELECTRICAL SYSTEM: Lighting System In Compliance With US/ ISO Standards, H7 Headlamps.
  • ELECTRICAL SYSTEM Battery: 12 V / 100 Ah
  • ELECTRICAL SYSTEM Cold-starting aid: Glow Plugs
  • ELECTRICAL SYSTEM Generator : 14 V / 95 A
  • ELECTRICAL SYSTEM Nominal voltage: 12 V
  • ELECTRICAL SYSTEM Starter: 12 V / 3.5 Hp (2.6 K W)
  • FLUID CAPACITIES Fuel tank: 20 Gal (75 L)
  • FLUID CAPACITIES Hydraulic system (incl. tank): 15 Gal (55 L)
  • FORK LIFT ATTACHMENT Length fork tines 4" x 1.8" (100 mm x 45 mm): 3' 7" (1,100 Mm)
  • FORK LIFT ATTACHMENT Load center from fork attachment point : Load Center From Fork Attachment Point
  • FORK LIFT ATTACHMENT Operating load in transport position, above ground level, total steering range: 5,512 Lbs (2,500* Kg)
  • FORK LIFT ATTACHMENT Operating load (SAE J 1197) over the total lift and steering range: 2,945 Lbs (1,335* Kg)
  • FORK LIFT ATTACHMENT Stability factor: 2
  • FORK LIFT ATTACHMENT Width of fork carrier: 4' 1" (1,240 Mm)
  • LOADER FRAME : Loader Installation Featuring True Parallel Linkage And Hydraulic Quick Coupler
  • LOADER FRAME Breakout force at bucket edge (SAE J 732): 10,318 Lbs (45,900 N)
  • LOADER FRAME General-purpose bucket (SAE J 742): 1.05 Yd3 (0.80 M3 )
  • LOADER FRAME Lift capacity at ground level (SAE J 732): 10,800 Lbs (48,000 N)
  • POWER TRANSMISSION: Hydrostatic Drive, Closed Circuit, Independent From Loader Hydraulics. Perfected Driving Automatics, Automatic Optimisation And Adjustment Of Drawbar Pull And Speed. Hydraulic Motor Power Shift Providing Two Speed Ranges. Infinitely Variable Speed Control Forward And Reverse. 4-wheel Drive From Reduction Gear On Rear Axle Via Cardan Shaft To Front Axle. Inching Pedal For Sensitive Driving And Stopping At High Rpm.
  • POWER TRANSMISSION "High" : 0-10 / 0-22 Mph (0-16 / 0-36 Kph)
  • POWER TRANSMISSION One: 4 Speeds:
  • POWER TRANSMISSION "Low": 0-3 / 0-6 Mph (0-5 / 0-10 Kph)
  • STEERING: Articulated, 1 Steering Cylinder With Final Positioning Damping On Both Sides, Fully Hydraulic Through Load- Sensing Priority Valve, Quick And Easy Steering Even At Engine Idle-running Speed.
  • STEERING Total steering angle: 80 Deg.
  • TIRES Standard: 405/70 R 18 SPT 9 Dunlop

Dimensions

  • OPERATING DATA, STANDARD EQUIPMENT Operating weight (SAE J 1197): 10,802 Lbs (4,900 Kg)
  • OPERATING DATA, STANDARD EQUIPMENT Tipping load, articulated at full reach (ISO 14397-1): 7,341 Lbs (3,330 Kg)
  • OPERATING DATA, STANDARD EQUIPMENT Tipping load, straight at full reach (ISO 14397-1): 8,311 Lbs (3,770 Kg)
  • OPERATING DATA, STANDARD EQUIPMENT Total height (top of cab): 8' 8" (2,640 Mm)
  • OPERATING DATA, STANDARD EQUIPMENT Total length, bucket on ground: 16' 7" (5,060 Mm)
  • OPERATING DATA, STANDARD EQUIPMENT Total width: 6' 1" (1,850 Mm)
  • OPERATING DATA, STANDARD EQUIPMENT Turning radius at outside bucket edge: 13' 8" (4,160 Mm)
  • OPERATING DATA, STANDARD EQUIPMENT Wheelbase: 6' 11" (2,100 Mm)

Hydraulics

  • HYDRAULIC SYSTEM Control unit: : Proportional Hydraulic Valve With 3 Control Circuits, Supplying Work Functions “ Lift/ Lower”, “ Dump/ Tilt-back With High-speed Control” And “3rd Control Circuit (1st Additional Control Circuit)”. Simultaneous, Independent Control Of All Movements.
  • HYDRAULIC SYSTEM Four: Single, Four-way Control Lever (joystick) With Integrated Direction-of-travel Switch And Switch For Additional Control Circuit.
  • HYDRAULIC SYSTEM Hydraulic cylinders:: 1 Lifting Cylinder, 1 Tilt Cylinder, All Dual-action
  • HYDRAULIC SYSTEM Max. pump capacity: 17 Gpm (64 L/min)
  • HYDRAULIC SYSTEM Max. working pressure: 3,625 Psi (250 Bar)
  • HYDRAULIC SYSTEM One: The Thermostatically Controlled Oil Circuit Ensures That The Oil Temperature Is Promptly Reached And Avoids Overheating. Return Filter Installed In Hydraulic Tank Allows For Eco-friendly Replacement Of Filter Elements
  • HYDRAULIC SYSTEM Three: Hydraulically Switchable Float Position By Overdriving The Pressure Point “ Lower” On The Joystick, Electrically Switchable Continuous Operation Function.
  • HYDRAULIC SYSTEM Two: Fingertip Control For 3rd Control Circuit, Electro-proportional, Oil Flow Limitation Via Machine Function Display, Continuous Operation. Installation On Loader Frame Incl. Couplings.

Engine

  • Combustion: 4-stroke Cycle, Common Rail Injection
  • Cooling system: Water
  • Displacement: 177 In3 (2,900 Cm3)
  • Engine power: 61 HP (45 K W)
  • Manufacturer, model: Deutz, TCD 2.9 L4
  • Max. torque: 177 Lb Ft (240 Nm) @ 1,600 Rpm
  • Net power rating at 2,200 rpm (SAE J 1349): 60 Hp (45 K W)
  • Number of cylinders: 4 In Line
  • Type: Turbo Diesel Engine With Intercooler, Exhaust-gas Optimised, EPA Tier 4 Final / EC Stage III B

Manufacturer Description

Loaders

YANMAR V8 5005020144
This 2018 YANMAR V8 is located in Ottawa Lake, Michigan. Complete the form below to send us an email for more information about this Loaders.

Estimate Payments

Estimate Payments1 -

Estimate
Payment Shown Here
1Excludes tax, title, tags and other fees. For general informational purposes only.
New 2018 YANMAR Loaders V8
# WL041076
$231/day
$924/week
$2,079/month
Purchase Price: $71,500
Contact Buck & Knobby Equipment Co.
1-888-395-7785
Buck & Knobby Equipment Co.

WELCOME TO BUCK & KNOBBY EQUIPMENT CO, INC. We carry an expansive display of new and used equipment and a wide range of brands that will help you get any job done quickly and efficiently. We represent major lines including Hyundai, Manitou, Mustang, and Yanmar. We also offer Bob-Cat Mowers, Honda Power Equipment, Grasshopper, Scag Mowers, Stihl and more. We also stock a variety of Eager Beaver, Felling and Interstate Trailers ready for immediate delivery.

Call 1-888-395-7785 Call 1-888-395-7785
Contact Seller

Call 1-888-395-7785

Rental Dates (optional)

I would also like to see:  

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Buck & Knobby Equipment Co.

WELCOME TO BUCK & KNOBBY EQUIPMENT CO, INC. We carry an expansive display of new and used equipment and a wide range of brands that will help you get any job done quickly and efficiently. We represent major lines including Hyundai, Manitou, Mustang, and Yanmar. We also offer Bob-Cat Mowers, Honda Power Equipment, Grasshopper, Scag Mowers, Stihl and more. We also stock a variety of Eager Beaver, Felling and Interstate Trailers ready for immediate delivery.

Call 1-888-395-7785 Call 1-888-395-7785
Contact Seller

Call 1-888-395-7785

Rental Dates (optional)

I would also like to see:  

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Disclaimers

Equipment Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. EquipmentTrader.com is not responsible for the accuracy of the information. Please refer to the Equipment Trader Terms of Use for further information.


Download Our App
image loading image loading