Saved

Sell

Rent

Search
Used 2019 Bobcat Excavators E50
# SR3674
Actual trade-in value is dependent upon an in-person inspection.

Robert H. Finke & Sons Inc.
Selkirk, NY

Popularity Stats

Loading Data...
Loading Data...
Loading Data...

Description

# SR3674
2019 Bobcat E50, A standout in the 4-to-5-ton size class, the Bobcat® E50 compact excavator (mini excavator) works in confined areas without sacrificing digging performance. It features minimal tail swing action with less than an inch of tail overhang. The Tier 4-compliant E50 is available with a long arm option that maximizes dig depth, reach and dump height clearance. An angle blade option is also available.

Message from Robert H. Finke & Sons Inc.

PLAN AHEAD AND $AVE!

Set your company up for success in 2022 by taking advantage of Section 179 Deduction for 2021 Equipment expenses. In order to take advantage of the Section 179 Tax Deduction for 2021, it is not enough to simply buy the equipment. The eligible equipment must be purchased and put into service by midnight 12/31/2021. Considering supply chain issues and delivery times for some equipment, planning ahead is critical if you want to leverage the Section 179 deduction for the 2021 tax year. 

Browse our inventory, or contact us to order your next machine in time to save money with the Section 179 Deduction!

 

 

Details

  • Condition: Used
  • Year: 2019
  • Make: Bobcat
  • Model: E50
  • Class: EARTHMOVING
  • Category: Excavators
  • Location: Selkirk, NY
  • Stock Number: SR3674
  • Hours: 800

Factory Specs

Operational

  • Arm Digging Force: 6,744 Lbf
  • Auxiliary Pressure: 3,045 Psi
  • Auxiliary Std Flow: 20 Gal/min
  • Boom Swing - Left: 75� B0;
  • Boom Swing - Right: 50� B0;
  • Bucket Digging Force: 8,977 Lbf
  • Lift Radius: 118 In
  • Maximum Dig Depth: 11.6 Ft
  • Max Dump Height: 12.7 Ft
  • Maximum Reach at Ground Level: 19.5 Ft
  • Rated Lift Capacity: 6034 Lb
  • Travel Speed - High: 3.1 Mph
  • Travel Speed - Low: 1.9 Mph
  • PTO HP: 48.3 Hp
  • Auxiliary High Flow: 36.6 Gal/min
  • Cargo Box Bed Load Capacity: 2000 Lb
  • Cargo Box Bed Load Height: 38.2 In
  • Cargo Box Height: 10 In
  • Cargo Box Length: 56 In
  • Cargo Box Maximum Load: 2000 Lb
  • Cargo Box Volume: 18 Ft� B3;
  • Cargo Box Width: 51 In
  • Dig Depth: 48 In
  • Dig Depth Without Extensions: 72 In
  • Dig Force Bucket: 4,878 Lbf
  • Dig Force Dipper: 3,291 Lbf
  • Dig Width: 914.4 Mm
  • Ground Clearance: 9.2 In
  • Height to Bucket Hinge Pin: 132 In
  • Lift Capacity at 24" behind Lift Point: 1775 Lb 24” Behind Lift Point
  • Lift Capacity At 24" behind Lift Point: 2,908 Lb
  • Lift Capacity @ 500mm Ahead Of Bkt Pivot: 2,324 Lb
  • Machine Rated Capacity: 2200 Lb
  • Travel Speed - Max: 17 Mph
  • Maximum Dig Depth: 72 In
  • Mid PTO - RPM: 2000
  • Operating Weight: 1925 Lb
  • Operating Weight Less Bit: 454 Lb
  • Operating Weight V: 1113 Lb
  • Operating Weight With Teeth V: 1,177 Lb
  • Operating Weight Withfrontgate: 2,367 Lb
  • Operating Weight Without Teeth V: 1,213 Lb
  • Operating Weightwith Pinon Mount: 876 Lb
  • Operating Weightwith X Change Mount: 881 Lb
  • Outside Turning Diameter: 210 In
  • 3-Point Hitch: Category 2
  • PTO HP: 25 Hp
  • 3-pt Lift Control Type: Position With Draft Control
  • Rated Operating Capacity (SAE): 3,325 Lb
  • Reach @ Maximum Height: 31.5 In
  • Rear PTO - RPM: 540
  • Rear PTO System: Independent
  • Rear PTO - RPM: 540
  • System Relief @ Quick Couplers: 3,500 Psi
  • 3-Point Hitch: Category 1
  • Tipping Load: 6650 Lb
  • Total Vehicle Rated Capacity: 4200 Lb
  • Travel Speed: 17.79 Mph
  • Travel Speed - Reverse: 17.8 Mph
  • Travel Speed (2-speed option): 12.3 Mph
  • Turning Radius: 85.8 In
  • Turning Radius (AWS Mode): 151.5 In

Dimensions

  • Height: 99.7 In
  • Height with Operator Cab: 99.7 In
  • Length: 218.7 In
  • Operating Weight: 10,677 Lb
  • Overall Length in Travel Position: 218.7 In
  • Weight Class: 4.8 T
  • Width: 77.2 In
  • Bed Height From Ground: 38.2 In
  • Blade Height: 25.2 In
  • Box Blade Moldboard Width: 84 In
  • Bucket Capacity: 18.5 Ft3
  • Capacity: 6.9 Ft3
  • Closed Height: 34.1 In
  • Closed Length: 49.1 In
  • Cutting Edge Length: 6 In
  • Cutting Edge Reversible Length: 6 In
  • Cutting Edge Reversible Width: 0.6 In
  • Cutting Edge Width: 79 In
  • Cutting Width: 89.5 In
  • Discharge Chute Height: 93.3 In
  • Drum Diameter Padded: 26 In
  • Drum Width: 80 In
  • Drum Width Max: 40 In
  • Feed Table Height: 25.4 In
  • Fork Width: 4 In
  • Frame Weight: 356 Lb
  • Grapple Width: 82.5 In
  • Ground Clearance: 7.2 In
  • Height Hammer Fully Raised: 74 In
  • Height V: 37.6 In
  • Height With Blade Extension: 32.8 In
  • Hopper Capacity: 10 Ft3
  • Intake Height: 21 In
  • Iso Heaped Capacity V: 88.99 Ft3
  • Iso Struck Capacity V: 0.38 Ft3
  • Length V: 46.4 In
  • Length with Standard Bucket: 141.6 In
  • Length without Attachment: 114.3 In
  • Maximum Aggregate Size: 1.5 In
  • Maximum Cutting Capacity: 4 In
  • Moldboard Cutting Edge Reversible Height: 6 In
  • Moldboard Cutting Edge Reversible Width: 0.5 In
  • Open Height: 51.8 In
  • Open Length: 49.1 In
  • Overall Attachment Width: 89.9 In
  • Pallet Fork Width: 1.3 In
  • Sweep Width: 84 In
  • Sweep Width Fully Angled: 65.5 In
  • Sweep Width Fully Angled At: 25deg
  • Sweep Width Straight: 70 In
  • Vertical Pumping Height: 50 Ft
  • Weight Of Hammer: 1,140 Lb
  • Wheelbase: 48.3 In
  • Width V: 91.8 In
  • Width (with bucket): 74 In
  • Working Width Angled Blade: 85 In
  • Working Width Fully Angled: 83 In
  • Working Width Scoop Blade: 84 In
  • Working Width Straight Blade: 98 In
  • Working Width V Blade: 85.5 In

Engine

  • Emissions Tier (EPA): Tier 4
  • Engine Fuel: Diesel
  • Fuel Tank: 21.1 Gal
  • Horsepower: 49.8 Hp
  • Maximum Governed RPM: 2,200 Rpm
  • Displacement: 111 In³
  • Emissions Tier (EPA): Tier 4
  • Engine Cooling: Liquid
  • Engine Model: 3 FT- TH4- U
  • Engine Shutdown:
  • Fuel Tank: 14.8 Gal
  • Gross HP: 57.7 Hp
  • Number of Cylinders: 3
  • Optional Horsepower: N/a
  • RPM: 2600
  • Spark Arrestor Muffler:
  • Turbocharged Engine:

Drivetrain

  • Brake Type: Wet Multi Disc
  • Max Wheel Tip Speed: 2,985 Ft/min
  • Recommended Drum Speed: 20 Rpm
  • Recommended Drum Speed At: 11 Gal/min
  • Tip Speed At22gpm: 3,256 Ft/min
  • Transmission Type: Infinite, 3 Range Hydrostatic ( Servo Control Valve With Electric Sol.)

Hydraulics

  • Implement Hydraulic Flow: 9.62 Gal/min
  • Steering Hydraulic Flow: 4.94 Gal/min
  • Flow Range Max: 28 Gal/min
  • Flow Range Min: 15 Gal/min
  • Implement Hydraulic Flow: 14 Gal/min
  • Steering Hydraulic Flow: 12 Gal/min
  • Total Hydraulic Flow: 26 Gal/min

Measurements

  • Bucket Width: 6' 0"
  • Front Tire Size: Front AG.( Turf, Industrial) '9.5-16(29-12.5-15, 10-16.5)
  • Ground Clearance: 13.7 In
  • Height: 96.5 In
  • Length: 139.6 In
  • Loader Lift Height: 9' 1"
  • Rear Tire Size: Rear AG.( Turf, Industrial) '13.6-28(21.5 L-16.1, 17.5-24)
  • Turning Radius: 10' 0"
  • Wheelbase: 6' 3"
  • Width: 66 In

Other

  • Angle: 30deg
  • Auger Diameter: 12 In
  • Broom Bristle Diameter: 24 In
  • Broom Diameter: 24 In
  • Broom R P M At: 15 Gal/min
  • Concrete Cylinder Diameter: 6 In
  • Concrete Cylinder Stroke: 24 In
  • Cutting Depth Max: 5 In
  • Cutting Depth Min: 0 In
  • Cutting Wheel Diameter: 28.5 In
  • Cylinder Bore: 3.5 In
  • Cylinder Rod: 1.8 In
  • Cylinder Stroke: 9.6 In
  • Degree Of Angle Right Or Left: 12deg
  • Discharge Chute Angle: 227deg
  • Drum Diameter: 14.5 In
  • Drum Diameter Padded: 26 In
  • Fan Diameter: 14 In
  • Feeder Opening: 9.2 In
  • Hammer Stroke: 38 In
  • Horizontal Pumping Distance: 250 Ft
  • Max Concrete Thickness: 18 In
  • Max Reach: 77 In
  • Maximum Concrete Pressure: 750 Psi
  • Maximum Cutting Angle: 8deg
  • Maximum Recommended Boring Distance: 30 Ft
  • Oscillation Angle: 10deg
  • Planing Distance Next To Curb: 2.6 In
  • Predrilled For V: Bolt-on Edges Or Teeth
  • Pumping Cylinder Diameter: 3 In
  • Shut Off Travel: 8.5 In
  • Swing Angle: 48deg
  • Swing Tube Diameter: 5 In
  • Swing Valve Cylinder Diameter: 3 In
  • Swing Valve Cylinder Stroke: 6 In
  • Tine Radius: 33 In
  • Tine Thickness: 0.8 In
  • Tine Thickness V: 0.4 In
  • Tree Diameter Continous Use: 5 In
  • Tree Diameter Intermittent Removal: 9 In
  • Tree Diameter Occasional Removal: 12 In
  • Working Depth: 3.5 In

Manufacturer Description

A standout in the 4-to-5-ton size class, the Bobcat® E50 compact excavator (mini excavator) works in confined areas without sacrificing digging performance. It features minimal tail swing action with less than an inch of tail overhang. The Tier 4-compliant E50 is available with a long arm option that maximizes dig depth, reach and dump height clearance. An angle blade option is also available.

Bobcat E50 5015774733
This 2019 Bobcat E50 has 800 hours of use and is located in Selkirk, New York. Complete the form below to send us an email for more information about this Excavators.

Estimate Payments

Estimate Payments1 -

Estimate
Payment Shown Here
1Excludes tax, title, tags and other fees. For general informational purposes only.
Used 2019 Bobcat Excavators E50
# SR3674

Actual trade-in value is dependent upon an in-person inspection.
Contact Robert H. Finke & Sons Inc.
1-855-795-6756
Robert H. Finke & Sons Inc.

PLAN AHEAD AND $AVE!

Set your company up for success in 2022 by taking advantage of Section 179 Deduction for 2021 Equipment expenses. In order to take advantage of the Section 179 Tax Deduction for 2021, it is not enough to simply buy the equipment. The eligible equipment must be purchased and put into service by midnight 12/31/2021. Considering supply chain issues and delivery times for some equipment, planning ahead is critical if you want to leverage the Section 179 deduction for the 2021 tax year. 

Browse our inventory, or contact us to order your next machine in time to save money with the Section 179 Deduction!

 

 

Call 1-855-795-6756 Call 1-855-795-6756
Contact Seller

Call 1-855-795-6756

I would also like to see:  

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Robert H. Finke & Sons Inc.

PLAN AHEAD AND $AVE!

Set your company up for success in 2022 by taking advantage of Section 179 Deduction for 2021 Equipment expenses. In order to take advantage of the Section 179 Tax Deduction for 2021, it is not enough to simply buy the equipment. The eligible equipment must be purchased and put into service by midnight 12/31/2021. Considering supply chain issues and delivery times for some equipment, planning ahead is critical if you want to leverage the Section 179 deduction for the 2021 tax year. 

Browse our inventory, or contact us to order your next machine in time to save money with the Section 179 Deduction!

 

 

Call 1-855-795-6756 Call 1-855-795-6756
Contact Seller

Call 1-855-795-6756

I would also like to see:  

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Disclaimers

Equipment Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. EquipmentTrader.com is not responsible for the accuracy of the information. Please refer to the Equipment Trader Terms of Use for further information.


Download Our App
image loading image loading