Saved

Sell

Rent

Search
Used 2018 John Deere Tractors 3025E
# 10016874
Price includes your $0 estimated trade-in value. Actual trade-in value is dependent upon an in-person inspection.

Ag-Pro of Carnesville
Carnesville, GA

Popularity Stats

Loading Data...
Loading Data...
Loading Data...

Description

# 10016874
2018 John Deere, 3025E, compact_ut_tractors, Cab: No Cab, Transmission: Hydro, Front Axle: MFWD, Loader: Yes, Mid Mount Mower: No, , GOOD TRACTOR ALL WORKS GOOD AND SAVE THOUSANDS OFF A NEW ONE LOW HRS GOOD GARDEN TRACTOR OR ODD JOBS AROUND THE HOUSE OR FARM

Details

  • Condition: Used
  • Year: 2018
  • Make: John Deere
  • Model: 3025E
  • Class: AGRICULTURE
  • Category: Tractors
  • Location: Carnesville, GA
  • Stock Number: 10016874
  • Serial Number: 1LV3025ECJJ122118
  • Hours: 288

Factory Specs

Operational

  • 2WD OR 4WD
    :
    4 WD
  • CAB OR OPEN STATION
    :
    Open Station
  • HP:
  • PTO HP
    :
  • TRANSMISSION TYPE
    :
    Hydrostatic - 2 Range
  • Cruise control : Optional
  • Operator station Gear shift location - console/floor : Left-hand Side
  • Operator station Platform - flat/straddle : Semi-flat
  • Operator station Rollover protective structure : Type/ Foldable/ ASABE S478
  • Power take-off (PTO) Brake (for mid and rear PTO) : Wet Disc
  • Power take-off (PTO) Clutch: Independent
  • Power take-off (PTO) Control: Independent
  • Power take-off (PTO) Standard: Rear - 540 Rpm
  • Tires Front: Farm - 7-14 / Turf - 27x8.5-15 / R4 - 25x8.5-14 / R4 - 27x8.5-15
  • Tires Rear: Farm - 11.2-24 / Turf - 41x14-20 / R4 - 15-19.5 / C R4 - 15-19.5

Hydraulics

  • Draft control sensing : Position Control
  • Implement hydraulics : 20.2 L/min (5.3 Gpm )
  • Maximum operating pressure : 172.4 Bar (172.4 Bar))
  • Pump rated output : Steering 15 L/min 4 Gpm Implement 20.2 L/min 5.3 Gpm 35.2 L/min 9.3 Gpm
  • Pump type : Dual Gear
  • Remote control valves available : Up To Two (optional)
  • Standard transmission; forward/reverse : Hydrostatic Transmission ( HST)
  • Transmission Standard transmission; forward/reverse : Hydrostatic Transmission ( HST)
  • Type: Open Center

Engine

  • Air cleaner : Dual Element
  • Aspiration: Natural
  • Bore and stroke : 88 X 90 Mm (3.46 X 3.54 In. )
  • Compression ratio : 19.1:1
  • Cooling system : Water Pump
  • Cylinder liners : Cast-in-block
  • Cylinders/displacement : 3 / 1.64 L (3 / 100.2 Cu In. ) E
  • Emissions compliance : Final Tier 4
  • Engine model : 3 TNV88 F- EPJT2
  • Engine power (gross) : 18.2 K W (24.4 Hp )
  • Engine torque at rated speed : 69.6 Nm (51.3 Lb-ft )
  • Family: EYDXL1.64 NDA FYDXL1.64 NDA GYDXL1.64 NDA
  • Fluid capacities Crankcase with filter : 4.5 L (4.8 Qt )
  • Fuel tank capacity : 28.5 L (7.5 U. S. Gal. )
  • Injection pump type : Direct Injection
  • Lubrication: Pressurized
  • Manufacturer: Yanmar
  • Number of cylinders : Three
  • Power take-off (PTO) power : 14.4 K W (.19.4 Hp
  • Rated engine speed : 2400 Rpm
  • Steering hydraulics : 15 L/min (4 Gpm )

Measurements

  • Approximate shipping weight (open-station; cab) : 1007.9 Kg (2222 Lb )
  • Front axle clearance : 36.3 Cm (14.3 In. )
  • Hitch type : Category 1
  • Lift capacity, 24-in. behind link arms : 615.1 Kg (1356 Lb )
  • 3-point hitch Lift capacity, 24-in. behind link arms : 615.1 Kg (1356 Lb )
  • 3-point hitch Type: Category 1
  • Turning radius without brakes : 2.9 M (9.4 Ft )
  • Wheelbase : 159.5 Cm (62.8 In. )

Electrical

  • Alternator (12-V) : 55 Amp
  • Battery size : 500 CCA
  • Rated engine speed : 2400 Rpm
  • Starter size : 1.4 K W (1.9 Hp )

Drivetrain

  • Cooling system : Water Pump
  • Final drive Type: Bull Gear
  • Fuel system Type: Direct Injection
  • Transmission Axle capacity : Front 798 Kg / 1760 Lb/ Rear /1197 Kg/ 2640 Lb
  • Transmission Brakes: Wet Disc
  • Transmission Creeper: No
  • Transmission Cruise control : Optional
  • Transmission Differential lock : Yes
  • Transmission Final drive : Bull Gear
  • Transmission Steering: Power Steering

Manufacturer Description

John Deere 3025E

John Deere 3025E 5018235492
This 2018 John Deere 3025E has 288 hours of use and is located in Carnesville, Georgia. Complete the form below to send us an email for more information about this Tractors.

Estimate Payments

Estimate Payments1 -

Estimate
Payment Shown Here
1Excludes tax, title, tags and other fees. For general informational purposes only.
Used 2018 John Deere Tractors 3025E
# 10016874

Price includes your $0 estimated trade-in value. Actual trade-in value is dependent upon an in-person inspection.
Contact Ag-Pro of Carnesville
1-800-742-9755
Contact Seller

Call 1-800-742-9755

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Contact Seller

Call 1-800-742-9755

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Disclaimers

Equipment Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. EquipmentTrader.com is not responsible for the accuracy of the information. Please refer to the Equipment Trader Terms of Use for further information.


Download Our App
image loading image loading