Sell

Rent

Search
Used 2018 John Deere Loaders 3032E
# 4300
$19,500
Make An Offer
Ag-Pro of Gadsden
Gadsden, AL

Popularity Stats

Loading Data...
Loading Data...
Loading Data...

Description

# 4300
2018 John Deere, 3032E, tractor_loaders, 87 hours on tractor., , USED JOHN DEERE 3032E Tractor loader with bucket, Hydro Static Transmission, 32HP, Loader with R4 Tires. This tractor is in good shape and ready to go. The tractor has 87 hours on it.

Details

  • Condition: Used
  • Year: 2018
  • Make: John Deere
  • Model: 3032E
  • Class: AGRICULTURE
  • Category: Loaders
  • Location: Gadsden, AL
  • Stock Number: 4300
  • Serial Number: 1LV3032EVJJ123815
  • Movement Type: TRACKED

Factory Specs

Operational

  • 2WD OR 4WD
    :
    4 WD
  • CAB OR OPEN STATION
    :
    Open Station
  • HP:
  • PTO HP
    :
  • TRANSMISSION TYPE
    :
    Hydrostatic - 2 Range
  • Cruise control : Optional
  • Operator station Gear shift location - console/floor : Left-hand Side
  • Operator station Platform - flat/straddle : Semi-flat
  • Operator station Rollover protective structure : Type/ Foldable/ ASABE S478
  • Power take-off (PTO) Brake (for mid and rear PTO) : Wet Disc
  • Power take-off (PTO) Clutch: Independent
  • Power take-off (PTO) Control: Independent
  • Power take-off (PTO) Standard: 540 Rpm At 2500 Rpm
  • Tires Front: Farm - 7-14 / Turf - 27x8.5-15 / R4 - 25x8.5-14 / R4 - 27x8.5-15
  • Tires Rear: Farm - 11.2-24 / Turf - 41x14-20 / R4 - 15-19.5 / R4 - 43x16-20

Hydraulics

  • Draft control sensing : Position Control
  • Implement hydraulics : 20.2 L/min (5.3 Gpm )
  • Maximum operating pressure : 172.4 Bar (172.4 Bar))
  • Pump rated output : Steering 15 L/min 4 Gpm Implement 20.2 L/min 5.3 Gpm 35.2 L/min 9.3 Gpm
  • Pump type : Dual Gear
  • Remote control valves available : Up To Two (optional)
  • Standard transmission; forward/reverse : Hydrostatic Transmission ( HST)
  • Transmission Standard transmission; forward/reverse : Hydrostatic Transmission ( HST)
  • Type: Open Center

Engine

  • Air cleaner : Dual Element
  • Aspiration: Natural
  • Bore and stroke : 88 X 90 Mm (3.46 X 3.54 In. )
  • Compression ratio : 19.1:1
  • Cooling system : Water Pump
  • Cylinder liners : Cast-in-block
  • Cylinders/displacement : 3 / 1.64 L (3 / 100.2 Cu In. ) E
  • Emissions compliance : Final Tier 4
  • Engine model : 3 TNV88 C- NJT
  • Engine power (gross) : 22.9 K W (31.1 Hp )
  • Engine torque at rated speed : 87 Nm (64.2 Lb-ft )
  • Family: EYDXL1.64 NDA FYDXL1.64 NDA GYDXL1.64 NDA
  • Fluid capacities Crankcase with filter : 4.5 L (4.8 Qt )
  • Fuel tank capacity : 28.5 L (7.5 U. S. Gal. )
  • Injection pump type : High Pressure Common Rail Direct Injection
  • Lubrication: Pressurized
  • Manufacturer: Yanmar
  • Number of cylinders : Three
  • Power take-off (PTO) power : 18.6 K W (25 Hp )
  • Rated engine speed : 2500 Rpm
  • Steering hydraulics : 15 L/min (4 Gpm)

Measurements

  • Approximate shipping weight (open-station; cab) : 1007.9 Kg (2222 Lb )
  • Front axle clearance : 36.3 Cm (14.3 In. )
  • Hitch type : Category 1
  • Lift capacity, 24-in. behind link arms : 615.1 Kg (1356 Lb )
  • 3-point hitch Lift capacity, 24-in. behind link arms : 615.1 Kg (1356 Lb )
  • 3-point hitch Type: Category 1
  • Turning radius without brakes : 2.9 M (9.4 Ft )
  • Wheelbase : 159.5 Cm (62.8 In. )

Electrical

  • Alternator (12-V) : 55 Amp
  • Battery size : 500 CCA
  • Rated engine speed : 2400 Rpm
  • Starter size : 1.4 K W (1.9 Hp )

Drivetrain

  • Cooling system : Water Pump
  • Final drive Type: Bull Gear
  • Fuel system Type: High Pressure Common Rail Direct Injection
  • Transmission Axle capacity : Front 798 Kg / 1760 Lb/ Rear /1197 Kg/ 2640 Lb
  • Transmission Brakes: Wet Disc
  • Transmission Creeper: No
  • Transmission Cruise control : Optional
  • Transmission Differential lock : Yes
  • Transmission Final drive : Bull Gear
  • Transmission Steering: Power Steering

Manufacturer Description

John Deere 3032E

John Deere 3032E 5017841181
This 2018 John Deere 3032E is located in Gadsden, Alabama. Complete the form below to send us an email for more information about this Loaders.

Estimate Payments

Estimate Payments1 -

Estimate
Payment Shown Here
1Excludes tax, title, tags and other fees. For general informational purposes only.
Used 2018 John Deere Loaders 3032E
# 4300
Contact Ag-Pro of Gadsden
1-866-601-3501
Contact Seller

Call 1-866-601-3501

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Contact Seller

Call 1-866-601-3501

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Disclaimers

Equipment Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. EquipmentTrader.com is not responsible for the accuracy of the information. Please refer to the Equipment Trader Terms of Use for further information.


Download Our App
image loading image loading