Sell

Rent

Search
Used 2019 Bobcat Loaders S650
# 132120
$39,875
Make An Offer
National Lift Equipment
Bristol, PA

Popularity Stats

Loading Data...
Loading Data...
Loading Data...

Description

# 132120
2019 Bobcat S650, Fuel Type: Diesel Hours: 1590 Cab: Heat Aux Hydraulics: Yes Comments: Hi-Flow, A91 Package, Two Speed

Message from National Lift Equipment

Call NLE Today !! National Lift Equipment specializes in Scissor Lifts, Boom Lifts, Forklifts, Backhoes, Cranes, Skid Steer Loaders, and other used construction equipment. NLE can locate, evaluate, negotiate, inspect, lease and ship any machine you might need.

Details

  • Condition: Used
  • Year: 2019
  • Make: Bobcat
  • Model: S650
  • Class: LIFTING
  • Category: Loaders
  • Location: Bristol, PA
  • Fuel Type: Diesel
  • Stock Number: 132120
  • Hours: 1,590

Factory Specs

Operational

  • Auxiliary High Flow: 30.5 Gal/min
  • Auxiliary Std Flow: 23 Gal/min
  • Height to Bucket Hinge Pin: 124 In
  • Operating Weight: 8061 Lb
  • Rated Operating Capacity (SAE): 2,690 Lb
  • Reach @ Maximum Height: 31.5 In
  • System Relief @ Quick Couplers: 3,500 Psi
  • Tipping Load: 5380 Lb
  • Travel Speed: 7.1 Mph
  • Travel Speed (2-speed option): 12.3 Mph
  • Turning Radius: 82.9 In
  • PTO HP: 48.3 Hp
  • Arm Digging Force: 8,253 Lbf
  • Auxiliary Pressure: 3,045 Psi
  • Boom Swing - Left: 64� B0;
  • Boom Swing - Right: 61� B0;
  • Bucket Digging Force: 16,269 Lbf
  • Cargo Box Bed Load Capacity: 2000 Lb
  • Cargo Box Bed Load Height: 38.2 In
  • Cargo Box Height: 10 In
  • Cargo Box Length: 56 In
  • Cargo Box Maximum Load: 2000 Lb
  • Cargo Box Volume: 18 Ft� B3;
  • Cargo Box Width: 51 In
  • Dig Depth: 62 In
  • Dig Depth Without Extensions: 72 In
  • Dig Force Bucket: 2,200 Lbf
  • Dig Force Dipper: 968 Lbf
  • Dig Width: 914.4 Mm
  • Ground Clearance: 9.2 In
  • Ground Pressure (Rubber): 4.9 Psi
  • Length of track on ground: 40.6 In
  • Lift Capacity at 24" behind Lift Point: 1775 Lb 24” Behind Lift Point
  • Lift Capacity At 24" behind Lift Point: 2,908 Lb
  • Lift Capacity @ 500mm Ahead Of Bkt Pivot: 2,324 Lb
  • Lift Radius: 118 In
  • Machine Rated Capacity: 2200 Lb
  • Maximum Dig Depth: 15.5 Ft
  • Max Dump Height: 16.5 Ft
  • Max Lift: 173 Mm
  • Maximum Reach at Ground Level: 23.6 Ft
  • Travel Speed - Max: 17 Mph
  • Maximum Dig Depth: 76.2 In
  • Maximum Operating Pressure: 3,300 Psi
  • Mid PTO - RPM: 2000
  • Operating Weight Less Bit: 454 Lb
  • Operating Weight V: 1113 Lb
  • Operating Weight With Teeth V: 1,177 Lb
  • Operating Weight Withfrontgate: 3,065 Lb
  • Operating Weight Without Teeth V: 1,213 Lb
  • Operating Weightwith Pinon Mount: 876 Lb
  • Operating Weightwith X Change Mount: 881 Lb
  • Outside Turning Diameter: 210 In
  • 3-Point Hitch: Category 2
  • PTO HP: 25 Hp
  • 3-pt Lift Control Type: Position With Draft Control
  • Pump Capacity: 12 Gal/min
  • Rated Lift Capacity: 9754 Lb
  • Rear PTO - RPM: 540
  • Rear PTO System: Independent
  • Rear PTO - RPM: 540
  • Standard Boom Length: 79 In
  • 3-Point Hitch: Category 1
  • Total Vehicle Rated Capacity: 4200 Lb
  • Travel Speed - High: 2.9 Mph
  • Travel Speed - Low: 1.7 Mph
  • Travel Speed - Reverse: 2.9 Mph
  • Turning Radius (AWS Mode): 151.5 In

Dimensions

  • Height: 81.3 In
  • Height with Operator Cab: 81.3 In
  • Length: 136.8 In
  • Length with Standard Bucket: 136.8 In
  • Length without Attachment: 108.4 In
  • Wheelbase: 45.3 In
  • Width: 72.1 In
  • Width (with bucket): 74 In
  • Bed Height From Ground: 38.2 In
  • Blade Height: 432 Mm
  • Bolster Width: 1468 Mm
  • Box Blade Moldboard Width: 84 In
  • Bucket Capacity: 14.3 Ft3
  • Capacity: 6.9 Ft3
  • Capacity Heaped: 87.9 Ft3
  • Capacity Struck: 67.5 Ft3
  • Clamp Width: 15.9 In
  • Closed Height: 34.1 In
  • Closed Length: 49.1 In
  • Cutting Edge Length: 6 In
  • Cutting Edge Reversible Length: 6 In
  • Cutting Edge Reversible Width: 0.6 In
  • Cutting Edge Width: 79 In
  • Cutting Width: 66 In
  • Discharge Chute Height: 93.3 In
  • Drum Diameter Padded: 26 In
  • Drum Width: 80 In
  • Drum Width Max: 40 In
  • Feed Table Height: 25.4 In
  • Fork Width: 4 In
  • Frame Weight: 893 Lb
  • Frame Width Std Equipment: 56.2 In
  • Grapple Width: 82.5 In
  • Ground Clearance: 7.2 In
  • Height Hammer Fully Raised: 74 In
  • Height V: 37.6 In
  • Height With Blade Extension: 32.8 In
  • Hopper Capacity: 10 Ft3
  • Intake Height: 21 In
  • Iso Heaped Capacity V: 88.99 Ft3
  • Iso Struck Capacity V: 0.38 Ft3
  • Length V: 46.4 In
  • Maximum Aggregate Size: 1.5 In
  • Maximum Cutting Capacity: 4 In
  • Moldboard Cutting Edge Reversible Height: 6 In
  • Moldboard Cutting Edge Reversible Width: 0.5 In
  • Open Height: 51.8 In
  • Open Length: 49.1 In
  • Operating Weight: 18,977 Lb
  • Overall Attachment Width: 89.9 In
  • Overall Length in Travel Position: 246 In
  • Pallet Fork Width: 4 In
  • Sweep Width: 84 In
  • Sweep Width Fully Angled: 65.5 In
  • Sweep Width Fully Angled At: 25deg
  • Sweep Width Straight: 70 In
  • Vertical Pumping Height: 50 Ft
  • Weight Class: 8.6 T
  • Weight Of Hammer: 1,140 Lb
  • Width V: 91.8 In
  • Widths Available Max: 8 In
  • Widths Available Min: 6 In
  • Working Width: 75.4 In
  • Working Width Angled Blade: 85 In
  • Working Width Fully Angled: 83 In
  • Working Width Scoop Blade: 84 In
  • Working Width Straight Blade: 98 In
  • Working Width V Blade: 85.5 In

Engine

  • Emissions Tier (EPA): Tier 4
  • Engine Cooling: Liquid
  • Engine Fuel: Diesel
  • Engine Shutdown:
  • Fuel Tank: 23.9 Gal
  • Horsepower: 74 Hp
  • Spark Arrestor Muffler:
  • Turbocharged Engine:
  • Blade Tip Speed At2000rpm: 8,200 Ft/min
  • Blade Tip Speed At2200rpm: 9,000 Ft/min
  • Displacement: 55 In� B3;
  • Emissions Tier (EPA): Tier 4
  • Engine Model: 3 FT- TH4- U
  • Fuel Tank: 30.6 Gal
  • Gross HP: 57.7 Hp
  • Maximum Governed RPM: 2,100 Rpm
  • Number of Cylinders: 3
  • Optional Horsepower: N/a
  • RPM: 2600

Drivetrain

  • Blade Tip Speed Max: 9,000 Ft/min
  • Brake Type: Wet Multi Disc
  • Max Wheel Tip Speed: 2,985 Ft/min
  • Mower Blade Tip Speed: 18,770 Ft/min
  • Recommended Drum Speed: 20 Rpm
  • Recommended Drum Speed At: 11 Gal/min
  • Tip Speed At22gpm: 3,256 Ft/min
  • Transmission Type: Infinite, 3 Range Hydrostatic ( Servo Control Valve With Electric Sol.)

Hydraulics

  • Implement Hydraulic Flow: 9.62 Gal/min
  • Steering Hydraulic Flow: 4.94 Gal/min
  • Flow Range Max: 40 Gal/min
  • Flow Range Min: 17 Gal/min
  • Flow Rate: 17 Gal/min
  • Implement Hydraulic Flow: 14 Gal/min
  • Steering Hydraulic Flow: 12 Gal/min
  • Total Hydraulic Flow: 26 Gal/min

Measurements

  • Bucket Width: 6' 0"
  • Front Tire Size: Front AG.( Turf, Industrial) '9.5-16(29-12.5-15, 10-16.5)
  • Ground Clearance: 13.7 In
  • Height: 96.5 In
  • Length: 139.6 In
  • Loader Lift Height: 9' 1"
  • Rear Tire Size: Rear AG.( Turf, Industrial) '13.6-28(21.5 L-16.1, 17.5-24)
  • Turning Radius: 10' 0"
  • Wheelbase: 6' 3"
  • Width: 66 In

Other

  • Angle: 30deg
  • Auger Diameter: 14.2 In
  • Blade Base: 1212 Mm
  • Blade Offset Hydraulic Right Or Left: 13 In
  • Blade Offset Right Or Left: 12 In
  • Blade Tip Speed At2000rpm: 8,200 Ft/min
  • Blade Tip Speed At2200rpm: 9,000 Ft/min
  • Blows Per Minute At: 21 Gal/min
  • Broom Bristle Diameter: 24 In
  • Broom Diameter: 24 In
  • Broom R P M At: 15 Gal/min
  • Concrete Cylinder Diameter: 6 In
  • Concrete Cylinder Stroke: 24 In
  • Cutting Depth Max: 5 In
  • Cutting Depth Min: 0 In
  • Cutting Wheel Diameter: 28.5 In
  • Cylinder Bore: 3.5 In
  • Cylinder Rod: 1.8 In
  • Cylinder Stroke: 9.6 In
  • Degree Of Angle Right Or Left: 12deg
  • Discharge Chute Angle: 227deg
  • Drum Diameter: 14.5 In
  • Drum Diameter Padded: 26 In
  • Dynamic Force: 6,400 Lb
  • Fan Diameter: 14 In
  • Feeder Opening: 9.2 In
  • Frequency: 2000 Vpm
  • Hammer Stroke: 38 In
  • Hopper Capactiy: 9.6 Ft3
  • Horizontal Pumping Distance: 250 Ft
  • Max Concrete Thickness: 18 In
  • Max Cut Depth: 188 Mm
  • Max Reach: 88 In
  • Maximum Concrete Pressure: 750 Psi
  • Maximum Cutting Angle: 8deg
  • Maximum Recommended Boring Distance: 30 Ft
  • Moldboard Angle Right Or Left: 30deg
  • Oscillation Angle: 10deg
  • Planing Distance Next To Curb: 2.6 In
  • Predrilled For V: Bolt-on Edges Or Teeth
  • Pumping Cylinder Diameter: 3 In
  • Shank Thickness: 1.5 In
  • Shut Off Travel: 8.5 In
  • Side Shift Travel: 21.8 In
  • Spreading Pattern Max: 28 Ft
  • Spreading Pattern Min: 18 Ft
  • Swing Angle: 180deg
  • Swing Tube Diameter: 5 In
  • Swing Valve Cylinder Diameter: 3 In
  • Swing Valve Cylinder Stroke: 6 In
  • Tine Radius: 33 In
  • Tine Thickness: 0.8 In
  • Tine Thickness V: 0.4 In
  • Tool Diameter: 2.8 In
  • Tooth Radius: 41 In
  • Tooth Thickness: 1 In
  • Tree Diameter Continous Use: 5 In
  • Tree Diameter Intermittent Removal: 9 In
  • Tree Diameter Occasional Removal: 12 In
  • Wheel Diameter: 30 In
  • Working Depth: 3.5 In

Manufacturer Description

The Bobcat® S650 skid-steer loader is a vertical lift path model in the 600 frame size. It offers increased lifting capacity and provides greater forward reach at full lift height for loading trucks. The Tier 4 diesel engine delivers power and performance.

Bobcat S650 5017615483
This 2019 Bobcat S650 has 1590 hours of use and is located in Bristol, Pennsylvania. Complete the form below to send us an email for more information about this Loaders.

Estimate Payments

Estimate Payments1 -

Estimate
Payment Shown Here
1Excludes tax, title, tags and other fees. For general informational purposes only.
Used 2019 Bobcat Loaders S650
# 132120
Contact National Lift Equipment
1-800-610-9722
National Lift Equipment

Call NLE Today !! National Lift Equipment specializes in Scissor Lifts, Boom Lifts, Forklifts, Backhoes, Cranes, Skid Steer Loaders, and other used construction equipment. NLE can locate, evaluate, negotiate, inspect, lease and ship any machine you might need.

Call 1-800-610-9722 Call 1-800-610-9722
Contact Seller

Call 1-800-610-9722

I would also like to see:  

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

National Lift Equipment

Call NLE Today !! National Lift Equipment specializes in Scissor Lifts, Boom Lifts, Forklifts, Backhoes, Cranes, Skid Steer Loaders, and other used construction equipment. NLE can locate, evaluate, negotiate, inspect, lease and ship any machine you might need.

Call 1-800-610-9722 Call 1-800-610-9722
Contact Seller

Call 1-800-610-9722

I would also like to see:  

Stay safe. Read more about avoiding scams and protecting your money. By using this site, you agree to our Terms of Use & our Privacy Policy.

Disclaimers

Equipment Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. EquipmentTrader.com is not responsible for the accuracy of the information. Please refer to the Equipment Trader Terms of Use for further information.


Download Our App
image loading image loading