Boring Machines Equipment for Sale In Rhode Island

2019 Ditch Witch JT25, The Ditch Witch JT25 is an exceptionally powerful, productive, and specifically designed for the utility contractor, the JT25 is one of the quietest and most stable mid-size drills on the market. This used unit has 2812.6 hours, no locator, full rack of drill pipe, includes housing (no bit), no warranty. Call Ditch Witch Mid-States at 614-443-9751 for more details.

<p>2019 Ditch Witch JT25 with cab and about 1350 hours (currently has 1346 hours but has been lightly used since this posting). Locator – Subsite Commander 2, is not included, but can be sold with it for $7000 extra. Fully serviced about 100 hours ago 7-11-23 and additional service and cleaning on 11/2023. Comes with additional tooling – four channel beacon, paddle bit, housing, and starter rod, and 51 x 2-3/8 diameter 10’ long rods.</p>

2014 Ditch Witch JT100 All Terrain, Used 2014 (Pre-DEF) Ditch Witch JT100 All-Terrain Directional Drill for sale. The drill is immaculate (stored inside) and really low hours. The AT drill pipe has been used on a single bore. There is a lot of tooling, some new, and is in addition to the drill. Asking price is $525,000.00 "for all of it". Ditch Witch Dealer-Serviced throughout it's life (F.O.B. Columbus, Ohio). Please contact Ditch Witch Mid-States Sales Manager, Sam Swartz, at 614-443-9751 ext. 2230 for more information. Additional equipment details are as follows:Year: 2014 (Pre-DEF)Hours: 926.5Hours: 774 (Serviced)Inner Rod Hours: 1681,080 ft. of AT Drill Pipe (6 AT Pipe Boxes)Rockmaster Housing & Tri-cone BitEquipped with On-board Crane and Stake-down SystemOriginal Paint and no rust

CUSTOM BUILT, CBM Boring Machines, TRENCHLESS HORIZONTAL PIPELINE CRADLE AUGER BORING UNIT, CAT POWERED EATON FULLER TRANSMISSION DP WINCH NO TRACK STEEL CASING OR AUGERS BITSSerial Number: 3126

Other Virginia Abrasives | Core Drill Stand, Virginia Abrasives | Core Drill Stand

Other Norton Clipper | Cutoff Saw | 14 in., Norton Clipper | Cutoff Saw | 14 in.

2024 HAMMERHEAD, PB30G2 Boring Machines, 2024 Hammerhead Portaburst PB30G2 Lateral Pipe Burster (Unused)C/W: 4" Burst Tool, 150' of 3/4" Swedged Cable, PB13 Power Pack, 6 GPM @ 3,000PSI, Rated @ 28.65 Tons, Condition: NewLocation: San Jose, CASerial Number:

2024 TT TECHNOLOGIES, GRUNDOMAT 55P Boring Machines, Grundomat 2" 55P Basic Tool, Ground Piercing tool, great for small utility work, irrigation, unit was on a demo one time.Serial Number: P55232S13353

2020 Vermeer D24x40 S3, 2020 D24x40S3•2900 hours•125 HP John Deere Tier IV Final Engine•Large Aggressive Stake-Downs•5 Gallon Auto Greaser•50 GPM Aplex Mud Pump•28,000 lbs of Thrust & Pullback•4,200 lbs Rotational Torque•(50) 2.375” Used Firestick Drill Rod, approximately 50% remaining•Rubber Coated Steel Tracks, 90% Remaining•New Standard Dirt Drill Head•Tracking Remote•Machine is Ready for Work•Used Mixers and Locators also Available

2016 DCI, AF10 Boring Machines, AF10 Remote Screen in hard caseSerial Number: 30080581

2023 Minnich Mfg. A2C, Minnich A-1C and A-2C drills with steering feature on-slab drilling solutions for almost any project. The A-1C single-drill series and A-2C double-drill series can drill in horizontal, vertical and 35-degree stitch positions, and the A-1C is capable of skew drilling for maximum versatility. All models feature steering to enhance operator accuracy and control, an automatic shut-off feature that extends drill life and available dust collection to minimize dust and debris on the job site. The A-2C drill cuts operating time roughly in half due to the incorporation of the second drill.

2023 Minnich Mfg. A1C, Minnich A-1C and A-2C drills with steering feature on-slab drilling solutions for almost any project. The A-1C single-drill series and A-2C double-drill series can drill in horizontal, vertical and 35-degree stitch positions, and the A-1C is capable of skew drilling for maximum versatility. All models feature steering to enhance operator accuracy and control, an automatic shut-off feature that extends drill life and available dust collection to minimize dust and debris on the job site. The A-2C drill cuts operating time roughly in half due to the incorporation of the second drill.

2009 Lovat TBM 20- 159" MP159SE Tunnel Boring Machine.... Removed from service date - July 2010.... SN: 255XX.... Hours Show: 17,640.... Weights: Forward 85t / Stationary 50t (weights are not available).... Diameter 159"/4,038mm.... TBM is an open face TBM.... Capable of Installing Expandable Segments & Tunneling to Install Ribs and Lagging.... Single Conveyor System.... Cutter Head Low Speed 1.9 RPM & High of 3.8 RPM.... Operating Thrust 1380 ton.... Per Contact Regular PM ServicesPperformed to this TBM in a 100hr/ Biweekly Basis When Possible.... TBM Was Fully Refurbished Before Performing the Last Project in Between 2010-2012 and been stored outside since.... Unit tunneled 1,760 meters from last refurbishment..... General tunneling in soft ground.... Equipment Included: Dirt Cars, Segment Cars, Expandable Segment Forms/Molds, Gantry System w/Ground Conditioning System (GCS), Drawings, General Info. and Parts Details (limited), and an Operation Manual is available.... Original Manufacturer Lovat, recent technical support & historical technical rights owned by Lovsuns Tunneling Canada Ltd..... The Equipment is being sold on an as-is basis. Prospective Buyers are free to inspect the Equipment before purchase; but if any hidden defects are discovered after purchase, the Buyer has no recourse against the Seller..... There are no warranties accompanying the Equipment..... Location: Canada.... Stock #1899.... PRICE: $POR.... Call Justin or Shannon at Henry Equipment Sales Inc. .

1999 Lovat TBM 17- RMP100SE 100 Inch Tunnel Boring Machine.... **This Unit is Still in Use**(estimated availability June 2020).... SN: 192XX.... Hours Show: 34,839.... Hours were accurate as of April 1st, 2020 (runs an average of 12 hours per day 5 days per week).... Weights: Forward 30t / Stationary 22t.... Diameter 100"/2,540mm.... TBM is an open face TBM.... Capable of Installing Expandable Segments & Tunneling to Install Ribs and Lagging.... Single Conveyor System.... Cutter Head Low Speed 3.8 RPM & High of 6.1 RPM.... Operating Thrust 600 ton.... Unit Completely Analogue.... Per Contact Regular PM ServicesPperformed to this TBM in a 100hr/ Biweekly Basis When Possible.... TBM 100 Was Fully Refurbished Before Performing the Last Project in Between 2016-2020 and has been stored inside when not in use.... Unit tunneled 2,756 meters from last refurbishment.... General tunneling in soft ground.... Equipment Included: Dirt Cars, Segment Cars, Gantry System w/Ground Conditioning System (GCS), Drawings, General Info. and Parts Details (limited), and an Operation & Maintenance Manual is available.... Original Manufacturer Lovat recent technical support & historical technical rights owned by Lovsuns Tunneling Canada Ltd.... The Equipment is being sold on an as-is basis. Prospective Buyers are free to inspect the Equipment before purchase; but if any hidden defects are discovered after purchase, the Buyer has no recourse against the Seller..... There are no warranties accompanying the Equipment..... Location: Canada.... Stock #1903.... PRICE: $POR.... Call Justin or Shannon at Henry Equipment Sales Inc. .

1980 Lovat TBM 13- M126SE/RL 126 inch Tunnel Boring Machine.... Removed from service date - 2018.... SN: 48XX.... Hours Show: 42,336.... Weights: Forward 32t / Stationary 25.5t.... Diameter 126"/3,200mm.... TBM is an open face TBM.... Capable of Installing Expandable Segments & Tunneling to Install Ribs and Lagging.... Single Conveyor System.... Cutter Head Low Speed 5 RPM & High of 10 RPM.... Operating Thrust 750 ton.... Unit Completely Analogue.... Per Contact Regular PM Services Performed to this TBM in a 100hr/ Biweekly Basis When Possible.... TBM 126 Was Fully Refurbished Before Performing the Last Project in Between 2016-2018 and stored inside since.... Unit tunneled 1,527 meters from last refurbishment..... General tunneling in soft ground.... Equipment Included: Dirt Cars, Segment Cars, Gantry System w/Ground Conditioning System (GCS) If Available, Drawings, General Info. and Parts Details (limited), and an Operation & Maintenance Manual is available.... Original Manufacturer Lovat, recent technical support & historical technical rights owned by Lovsuns Tunneling Canada Ltd..... The Equipment is being sold on an as-is basis. Prospective Buyers are free to inspect the Equipment before purchase; but if any hidden defects are discovered after purchase, the Buyer has no recourse against the Seller..... There are no warranties accompanying the Equipment............ *** EXTRA Bearing can be purchased separately *** ....... Location: Canada.... Stock #1901.... PRICE: $POR USD....Call Justin or Shannon at Henry Equipment Sales Inc. .