Reman Engine to Fit SVL75-2 in stock or we can rebuild your Kubota SVL75-2 (No Fuel System, Turbo, DPF filter) engine in our shop.

All engines are thoroughly inspected.  Machined to factory specifications.

The engine is remanufactured with Kubota OEM parts (Pistons, rings, bearings, gaskets, seals, thermostat, water pump,).  Long Block Engines do not come with a fuel system. (i.e. injectors, injection pump, injector lines).

Please call for availability or to place an order on this engine.

This engine is configured to fit this application only and is covered by a 1-year/unlimited hours warranty including free tech support from date of invoice.

There are some parts that will need to be reused from old engine, and transferred to Your remanufactured engine: Starter, Alternator, Sending Units, Fan, Fan Belt, Manifolds, Pulleys, Flywheel Housing, Gaskets are sent with the engine, and rear seal is included if needed to change the bell housing.

 It is recommended to install new injectors, injection pump, and turbo (if applicable) or have them checked before installation.

Core charge is added to the selling price; the core needs to have good casting -contact us for more detail.

 Also, your engine can be sent in for remanufacturing.   Engine goes through the full remanufacturing process, and it is set as a priority in the remanufacturing process.

Note: If any core components need replacement on a customer request remanufacturing, extra charges may apply.

If the engine block has a hole, another engine block must be supplied, otherwise we cannot rebuild the engine.

If the engine block has a hole or another engine block must be supplied, otherwise we cannot rebuild the engine.